Bar and Table Top Systems

The system can be applied over any existing surface including Laminate, Tile, Formica, Quartz, Corian, Medex, Wood, or even Granite. It can be done in a variety of ways from simple to a little in-depth. We at iCoat will support you all the way through the process so you are successful and love the results. Our packages are 2 sizes, up to 25sqft and up to 50sqft. This is our motto, iCoat Products make living spaces beautiful.

Here is a link to our online step by step training. https://icoatcountertopproducts.vhx.tv/

We provide a simple 4 step process to upgrade your old Bar and Table Tops to make them beautiful again.

PREP

We are looking to work on a clean and sound substrate. Clean off the existing surfaces and remove any caulking. If there is anything damaged on the surface fix that first. The area is masked off to protect the cabinets and other appliances and craft paper is taped all around the floor. Make sure to do a great job prepping your work area, it will save a lot of unnecessary cleanup later.

PRIME

A thin layer of Countertop Composite cement is brushed on as a primer in preparation for a second slightly thicker concrete coat that may be molded and texturized. Make sure to cover the edges. This concrete dries fast and creates a flat surface. Stone lightly to knock off any excess peaks and then the dust is removed. Now you can prime the entire surface with iCoat Metal Illusion Primer in either Black or White as a base coat primer.

COLOR

Each kit includes the colors you see in the sample. Color can be added in a variety of ways to get your desired effect. You can color directly onto the primed surface or include color into the epoxy topcoat. Color can be brushed, dabbed, rolled, or sprayed onto the surface. (Use quality tools every time.)

SEAL

If the color is not going to be included in the iCoat Countertop Epoxy topcoat, it is time to add the durable epoxy finish. It is added liberally across the top surfaces and smoothed over the entire surface and down the edges with a plastic knife finished with an edge brush. Epoxy self-levels. Brush epoxy onto the edges and let the excess drip onto your prep paper. Lightly torch the epoxy to release any small bubbles and to get the surface to sparkle.

To work in color with the epoxy topcoat, add the vein colors with a knife, spray, or drip and work in with a chip brush to blend areas for the desired effect.

iCoat offers the ability to match any gloss reflection scale with iCoat Honing Oil to make the look to the desired customer's request.

Once all paper is removed the customer gets to see their new Bar and Table Tops in all their iCoat glory all in about 48hrs.

Read more about how we serve the hospitality industry and save them thousands while helping them maintain a clean and fresh establishment. Click here.