Bar and Tabletop Epoxy Systems

Award-Winning, Food-Safe Countertop System

The iCoat award-winning Countertop System for commercial use is our most popular product and usually catches the eye and excitement of anyone who experiences it. It is food-safe bar and tabletop epoxy that meets LEED Platinum Standards.

iCoat has emerged as the leader in decorative concrete countertop technology. iCoat not only invented the concrete resurfacing technology for countertops back in 2004 but has continually improved it as advances in concrete additives and colorants have become commercially available.

Here’s How it Works

This product is made of very thin layers of concrete that go directly over ugly Formica, Laminate, Tile, Wood, and traditional concrete. The topcoat is a 2 part bar and tabletop epoxy that self-levels and has additives for scratch resistance and scorch-proof. Of course, if you wanted to build a new countertop, you can use MDF or a water-resistant fiberboard called MDX or Medex as your substrate.

iCoat Countertop products have been used both in commercial and residential applications with great success. They are a great choice for restaurants, bars, pubs, eateries, bathroom vanities, kitchen counters, tabletops, and even outdoor kitchens. iCoat countertop products can be made to replicate nearly any type of stone or granite, concrete, or even wood. What’s your vision?

There is a huge amount of opportunity for contractors and DIYers, with projects ranging from indoor and outdoor flooring to countertops—across both residential and commercial applications.

Get Started Today

The iCoat Countertop System is an easy 4-step process that any tradesman, handyman, or DIY enthusiast can do.

Prep

Prime

Color

Seal

Did you know? The average square feet of coverage. The answer? We have 2 kits, 25 sqft has a coverage area of 5’x5′ and 50 sqft kit covers an area of 10’x5′.

The bar and tabletop epoxy system can be applied over any existing surface including Laminate, Tile, Formica, Quartz, Corian, Medex, Wood, or even Granite. It can be done in a variety of ways from simple to a little in-depth. We at iCoat will support you all the way through the process so you are successful and love the results. Our packages are 2 sizes, up to 25sqft and up to 50sqft. This is our motto, iCoat Products make living spaces beautiful.

Here is a link to our online step by step training. https://icoatcountertopproducts.vhx.tv/

We provide a simple 4-step process to upgrade your old Bar and Tabletop epoxy to make them beautiful again.

PREP

We are looking to work on a clean and sound substrate. Clean off the existing surfaces and remove any caulking. If there is anything damaged on the surface fix that first. The area is masked off to protect the cabinets and other appliances and craft paper is taped all around the floor. Make sure to do a great job prepping your work area, it will save a lot of unnecessary cleanup later.

PRIME

A thin layer of Countertop Composite cement is brushed on as a primer in preparation for a second slightly thicker concrete coat that may be molded and texturized. Make sure to cover the edges. This concrete dries fast and creates a flat surface. Stone lightly to knock off any excess peaks and then the dust is removed. Now you can prime the entire surface with iCoat Metal Illusion Primer in either Black or White as a base coat primer.

COLOR

Each kit includes the colors you see in the sample. Color can be added in a variety of ways to get your desired effect. You can color directly onto the primed surface or include color into the epoxy topcoat. Color can be brushed, dabbed, rolled, or sprayed onto the surface. (Use quality tools every time.)

SEAL

If the color is not going to be included in the iCoat countertop bar and tabletop epoxy topcoat, it is time to add the durable epoxy finish. It is added liberally across the top surfaces and smoothed over the entire surface and down the edges with a plastic knife, finished with an edge brush. Epoxy self-levels. Brush epoxy onto the edges and let the excess drip onto your prep paper. Lightly torch the epoxy to release any small bubbles and to get the surface to sparkle.

To work in color with the epoxy topcoat, add the vein colors with a knife, spray, or drip, and work in with a chip brush to blend areas for the desired effect.

iCoat offers the ability to match any gloss reflection scale with iCoat Honing Oil to make the look to the desired customer’s request.

Once all paper is removed, the customer gets to see their new Bar and Table Tops in all their iCoat glory, all in about 48 hours.

Let’s get started!

Here is a selection of looks we have produced with our bar and table top epoxy system. You will want to achieve your own color scheme and vision, maybe embed decals or logos, and even charge suppliers to have their logos embedded on your tables. We will include all the products you need to upgrade your Bars and Table Tops. We are always just a chat or phone call away if you need any further assistance.