iCoat Countertop Concrete Composite Blend

The best decorative concrete composite for countertops and resurfacing substrates.

Product Description: iCoat Countertop Blend is a high strength, dry modified grout mix with water-resistant properties designed to provide a hard, and durable countertop surface. Paint on a thin layer to prep the surface, it dries super fast, then trowel on a surface layer and mold and smooth for your desired result. The hard surface can be lightly stoned to remove any bumps.

Surface Preparation: All areas must be clean, sound, and grease-free. Undermount sink areas should be protected with iCoat Sink Seal prior to installation.

Mixing Ratio: Mix iCoat Countertop Blend with water to desired consistency with a 1⁄2 inch drill and paddle mixer. A mixing whisk may be used for smaller quantities. See the iCoat instruction manual or the countertop training videos for more information.

Coverage:
Composite 20 lb 25-30 sq ft
Composite 40 lb 50-60 sq ft

40 Pounds covers approximately 60 square feet (0.66 lb. (0.30kg) per square foot at four coats).

Brush Coats: 2:1 (Two parts Countertop Blend to one part water)

Edging: 4:1 (Four parts Countertop Blend to one part water)

Top Coats: 3:1 (Three parts Countertop Blend to one part water)

Handling: Avoid contact with skin and eyes. When through with use, promptly clean hands and tools with warm soapy water. Lasts up to one year from the date of manufacture in an unopened pail. Store at room temperature with lid tightly closed. Dispose of empty container per local code. Clean spills promptly.

Countertop Blend 60 (40 Pounds • 18.14 Kg)

Countertop Blend 30 (20 Pounds • 9.07 Kg)

Epoxy
1 gallon 25-30 sq ft
2 gallon 50-60 sq ft