iCoat Patch and Fill
Please Login to view prices. Or Call 877-669-1110 to Register.
iCoat Patch and Fill is a high strength modified grout mix that is used to fill uneven or rough surfaces on concrete.
Description
Product Description: iCoat Patch and Fill is a high strength modified grout mix that is used to fill uneven or rough surfaces on concrete. iCoat Patch and Fill can be applied from a featheredged up to 1 1⁄2” thick. iCoat Patch and Fill will be dry to the touch in approximately 30 minutes and can be coated over in approximately 1 hour.
Surface Preparation: Surface must be free of grease, oil, or any other substance that can interfere with adhesion. All areas must be clean, dry, and structurally sound. Ambient and surface temperature must be between 40°F and 95°F.
Mixing Instructions: Mix Patch and Fill with cool water to a smooth creamy consistency with a 1⁄2 inch drill and paddle
mixer. Do not mix more material than can be used within 10 minutes. Remix occasionally during use.
Application: Apply Patch and Fill to the surface using a clean trowel. Can be troweled from a featheredge to 1 1⁄2 inches thick.
Related products
-
iCoat Epoxy Floor Urethane Sealer (Satin/Gloss) U500
Please Login to view prices. Or Call 877-669-1110 to Register. Read more -
iCoat Texture Coat Concrete Overlay 50lb Bag
Please Login to view prices. Or Call 877-669-1110 to Register. Read more -
iCoat Renew – for Sealed Concrete Floors
Please Login to view prices. Or Call 877-669-1110 to Register. Read more -
iCoat Countertop Concrete Composite Blend
Please Login to view prices. Or Call 877-669-1110 to Register. Read more